Aiming, Problems, Beeper definitions – Symbol Technologies LS 3603 User Manual
Page 16: Programming the system, Aiming -8, Scan the entire symbol -8 hold at an angle -8
1-8
LS 3603 Product Reference Guide
Aiming
Scan the Entire Symbol
•
Your scan beam must cross every bar and space on the symbol.
•
The larger the symbol, the farther away you should hold the scanner.
•
Hold the scanner closer for symbols with bars that are close together.
•
A short, high tone beep indicates a good decode.
Hold at an Angle
Do not hold the scanner directly over the bar code. In this position, light can
bounce back into the scanner's exit window and prevent a successful decode.
Problems
See
What If...
Beeper Definitions
The beeper in the unit provides a variety of messages. See Beeper Indications
beginning on
Programming the System
An LS 3603 is programmed by scanning sequences of bar codes; consult
Chapter 2.
RIGHT
WRONG
012345
012345