SMC Networks SMC8013WG - Manual (Page 32)

Command DHCPSHOW: "dhcpShow"
Description: This command is used to show the current dhcp lease info, including the IP, MAC
and status (online/expired/released) of the private LAN. There is no parameter for this
command. It will show the IP, MAC, and on-line for lease that renewed, released, and expired
successfully.
NOTE: If CPE has the successful IP lease and CM reboots at this stage, since the reboot time is
short, CPE won't renew its IP and will just keep the old IP. This IP lease won't be shown by this
dhcpShow command. In order to see this CPE lease, testers must force the CPE to perform
renew operation.
Command LANPOLL: "lanpoll"
Description: Checks all CM-remembered LAN clients (static-assigned IP or dynamic-assigned
IP). If they are on line, it will display the status as Active. If they are off line, they would be
shown as "Inactive". The display format includes IP, MAC and Status. For a fixed age-out time, if
no traffic passing and not existed in the DHCP lease, the client item would be removed from
table.
NOTE: The parameters in {..|..}, such as {A|B}, means it could be optional between A and B,
but must be one of them. The parameters in [..], like [count], means the count parameter
could be neglected and a default value or would behavior be used.