beautypg.com

SMC Networks SMC8013WG User Manual

Page 31

background image

Command ARP: "arp <[ether|cable]> "
Description: If there is no parameter specified for the ARP command, CM would display the

current sys ARP table. Otherwise, users must input the interface (ether or cable) and IP, and
then CM would send out an ARP request to ask the MAC address of the specified IP in the

correct interface.

Command ROUTERNAME: "routeName [name_of_router]"
Description: If users specify the command without parameter, CM would show the device

name. Otherwise, it will set the specified name as the device name.

See also other documents in the category SMC Networks Hardware: