SIGMA LBA-708 - Manual (Page 253)

Key Type Value Description
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
253
then local control is restored (equivalent to password lockout being disabled).
5 = 32x
EnergyOfBeam 4 F calibrated energy of beam entered in
Computations dialog
EnergyOfFrame 4 F raw frame total equivalent to
EnergyOfBeam
EnergyUnits 4 L 0 = j
1 = mj
2 = uj
3 = nj
u = pj
5 = w
6 = mw
7 = uw
8 = nw
9 = pw
10 = fl
AC 4 L -1 = ultracal was on but capture location,
frame size, or resolution did not match
0 = ultracal off
>0 = ultracal subtracted
RS 4 L -1 = reference subtract was on but capture
location, frame size, or resolution did not
match
0 = reference sub off
1 = reference sub subtracted
GC 4 L -1 = gain correct was on but capture
location, frame size, or resolution did not
match
0 = gain correct off
1 = gain correct multiplied
CommentLine 3 S up to 256 characters
WriteProtect 3 B 1 = cannot overwrite this frame
A.5.4.8 LOC - go to local
When the LOC message is sent or when the LBA-PC goes from remote to local via the REN line