SIGMA LBA-708 - Manual (Page 13)

1.4 Specifications
ENVIRONMENTAL
Operating Temperature: 0 °C to +50 °C
Storage Temperature: -55 °C to +75 °C
Humidity: 95% non-condensing
POWER REQUIREMENTS
PCI bus loading: +5 Vdc @ 350 mA., +3.3Vdc @ 50mA.
+12 Vdc @ 140 mA.* (w/o camera)
-12 Vdc @ 110 mA.
Power consumption: 4.75 watts (w/o camera)
*Total PCI load on +12 Vdc w/camera not to exceed 500 mA.
WEIGHT
Net: Approximately 0.23 kg (0.5 lb.)
Shipping: Approximately 1.4 kg (3 lb.)
INSTRUMENT CHARACTERISTICS
Video Input: 75 ohm Termination, ±5 volts dc max
Trigger Input:
edge sensitive (positive or negative), max input +12 Vdc, lower
threshold 1.1Vdc, upper threshold 2.5 Vdc, minimum pulse
width 10µs.
Trigger Output: +5 or +12 Vdc (positive or negative),
pulse width 700µs +/- 70µs.
Video Gain Adjust .8 to 1.4 w/ LBA-7XX; .8 to ~5 w/LBA-300/400/500
Pass/Fail Output +5 or +12 Vdc positive pulse, 250ms
Shutter Control Outputs TTL positive logic
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
13