Sharp FODC525 User Manual

Page 72

Dual-line Option (FO-DC600 only)

♦

If you wish to restrict either of the lines to transmission only or reception
only, see the following section.

♦

When you program an auto-dial number (Rapid Key or Speed Dial number),
you can specify that the number use a particular line.

Note: The

key cannot be used to select a line if either of the lines has

been set to reception only as explained in the following section. A line

selection made with

will override a line selection programmed into a

Rapid Key or Speed Dial number.

LINE

Press

and then

so that

LINE SETTING MODE is selected in the
display.

Press .

•

Line 1 is intially selected. If you wish to

adjust the setting for Line 2, press

to select LINE 2.

MENU

START/
ENTER

Display:

MENU MODE

1:LINE SETTING MODE
2:LISTING MODE
3:ENTRY MODE

LINE SETTING MODE

1:LINE 1
2:LINE 2

Restricting a line to transmission or reception /
selecting the reception mode for Line 1

You can restrict either line to transmission only or reception only. You can also
use this procedure to select the reception mode (AUTO or MANUAL) for Line
1 (the reception mode for Line 2 is fixed at AUTO).

all.book Page 70 Thursday, May 13, 2004 8:51 AM