Sharp FODC525 User Manual

Page 205

Optional Settings

203

7. Optional

Settings

Setting 05: TRANSACTION REPORT PRINT SELECTION

This sets the condition for printing out a Transaction Report. Press

to select one of the following conditions, and then press

♦

Initial setting: ERROR ONLY

Setting 06: RECALL TIMES
This sets the maximum number of times your fax will automatically redial if the

line is busy. Enter any number from

♦

Initial setting: 02

Setting 07: RECALL INTERVAL
This sets the amount of time your fax will wait between automatic redials

when the line is busy. Enter

for 1 minute,

for 2 minutes, etc.,

up to a maximum of 15 minutes.

♦

Initial setting: 05

Setting 08: SECURITY SELECTION

Select ON to turn polling security on, or OFF to turn it off. Press

to make the selection and then press

♦

Initial setting: ON

ERROR/TIMER/
MEMORY:

A report will be printed after an error, timer
operation, or memory operation

SEND ONLY

A report will be printed only after a
transmission

ALWAYS PRINTS

A report will be printed after each
transmission, reception, or error

NEVER PRINTS

A report will never be printed.

ERROR ONLY

A report will be printed only after an error
occurs

START/
ENTER

all.book Page 203 Thursday, May 13, 2004 8:51 AM