Sharp FODC525 User Manual

Page 212

Optional Settings

210

to select NO and then press

. (Note that the function will turn off

automatically if the selected paper source runs out of paper.)

Note for FO-DC500: This setting is only available if your dealer has installed the
paper cassette option.

♦

Initial setting: NO

Note: If you turn off the Separate Mode setting, Option Setting 16 will
subsequently appear in the display to allow you make an appropriate setting for
cassette selection. If you don’t make a selection, AUTO SELECTION will be
automatically selected.

Setting 32: BACKLIGHT SETTING
Use this setting to set the amount of time until the display backlight turns off

after the operation panel is used (after a key is pressed). Press

to select the amount of time (3 MINUTES, 10 MINUTES, or 15 MINUTES), or
select ALWAYS OFF if you never want the backlight to be on. When finished,

press .

♦

Initial setting: 3 MINUTES

Note: Settings 33 through 36 are not used.

Setting 37: FAX TRANSFER
This setting only appears if the network scanner option is installed. Select
ALWAYS PRINT if you wish to have the machine print all faxes that are
forwarded by the Inbound Routing function. Select PRINT ERROR ONLY to
have the machine only print faxes that are not successfully forwarded. Press

to make the selection and then press

♦

Initial setting: ALWAYS PRINT

START/
ENTER

all.book Page 210 Thursday, May 13, 2004 8:51 AM