Sharp FODC525 - Manual (Page 170)

Polling
168
Programming and clearing a System number
One 4-digit System number can be programmed in your machine for giving
and receiving polling permission. Polling will take place if your System number
matches the other fax machine’s System number or one of its ID numbers.
1
Press and then or
until ENTRY MODE is selected in the
display.
2
Press and then or
until SYSTEM # MODE is selected.
3
Press . Make sure that “SET” is
selected.
(To clear the number, select “CLEAR”,
press , and go to Step 6.)
4
Press .
5
Enter the number (4 digits) with the numeric keys.
6
Press .
7
Press repeatedly to return to the date and time display.
MENU
START/
ENTER
START/
ENTER
START/
ENTER
START/
ENTER
START/
ENTER
STOP
Display:
MENU MODE
1:RECEIVE MODE
2:LISTING MODE
3:ENTRY MODE
05:DAY LIGHT SAVING
06:ID # MODE
07:SYSTEM # MODE
SYSTEM # MODE
1=SET
2=CLEAR
all.book Page 168 Thursday, May 13, 2004 8:51 AM