Sharp FODC525 - Manual (Page 16)

14
1. Installation
Unpacking Checklist
Before setting up, make sure you have all of the following items. If any are
missing, contact your dealer.
Telephone
line cord Toner
cartridge
Rapid Key
labels
ADF exit tray
Operation
manual Received
document tray
Power cord
Paper size
labels
Drum
cartridge
Points to keep in mind when setting up
Do not place the
machine in direct
sunlight. Do not place the
machine near
heaters or air
conditioners. Keep dust away from
the machine. Keep the area
around the
machine clear.
About condensation
If the machine is moved from a cold to a warm place, it is possible that
condensation may form on the scanning glass, preventing proper scanning of
documents for transmission. To remove the condensation, turn on the power
and wait approximately two hours before using the machine.
all.book Page 14 Thursday, May 13, 2004 8:51 AM