B&G H1000 Autopilot - Manual (Page 53)

calibration
h1000 pilot
Page 52
speed calibration
adjustment – ref
Reference speed adjustment, allows for quick and easy calibration of your boat speed readings against a
known calibrated source; for example, speed over the ground from a GPS or alongside another boat with
a calibrated log.
1) From the Speed Calibration Menu, highlight Adjustment , select ref from the drop-down box and
press ENTER to select. The display will now show the Reference Speed page.
2) If speed over the ground data is available on the system from a GPS, the h1000 will
automatically detect this and display this value on the screen with the message from SOG. To
accept this value, simply highlight
OK and press the ENTER key.
3) If speed over the ground is not available, simply highlight the speed value and, using the
UP/DOWN and ENTER keys, adjust the value to the known reference boat speed.
4) Next, highlight OK and press ENTER to complete the operation.
sea temperature units
Sea temperature information can be shown in qc or qf. To change the units, highlight Sea temp and
press ENTER. Using the UP/DOWN keys, highlight the desired choice, and press the ENTER key to
memorise.