Sanyo VPC-HD1E - Manual (Page 92)

English
86
SELF-TIMER
1
Display the PAGE 1 Shooting Setting Screen (page 65).
2
Select the self-timer menu.
3
Select the desired icon from the self-timer menu, and press the SET button.
h This completes the self-timer setting.
HINT
To pause or cancel the self-timer function...
i If the video clip recording button or still image shooting button is pressed
again before the shutter is released, the self-timer countdown temporarily
stops. Press the video clip recording button or still image shooting button
one more time to restart the self-timer.
i To cancel self-timer photography, select the N icon from the self-timer
menu, and press the SET button.
i After the self-timer picture is snapped, the self-timer is automatically reset
to off N.
When x is selected...
i When the still image shooting button or
video clip recording button is pressed,
the multi-indicator will blink for about 10
seconds, and then the image is captured.
Also, 4 seconds before the shutter
releases, the indication shown in the
illustration appears on the monitor.
i If you swivel the monitor unit towards the
subject, the self-timer indication will be
visible to the subject.
CAUTION
i The self-timer cannot be used in the sequential shots shooting mode.
N: Turns off the self-timer function.
y: Turns on the self-timer function. The image is captured about 2
seconds after the still image shooting button or video clip recording
button is pressed.
x: Turns on the self-timer function. The image is captured about 10
seconds after the still image shooting button or video clip recording
button is pressed.