Sanyo VPC-HD1E - Manual (Page 68)

English
62
3
Press the flash button to set the flash mode.
h Each time the flash button is pressed, the flash mode changes.
h Display the icon for the desired flash mode.
4
Press the still image shooting button.
h The picture is snapped and the flash operates according to the
selected mode.
HINT
i The flash cannot be used during video clip recording or in the sequential
shots mode.
m:The flash will operate with every image captured regardless
of the conditions. Use this setting under backlight conditions,
when the subject is in shade, under fluorescent lighting
conditions, etc. (forced flash).
l:The flash will not operate even in dark situations. Use this
setting when capturing an image in a location where flash
photography is prohibited, or when shooting a night
landscape scene (flash off).
J:The digital camera will detect the subject brightness and use
the flash only when required. At this time the flash will
operate in a manner that reduces the red reflection (“red-
eye”) in the subject’s eyes (red-eye reduction).