Sanyo VPC-HD1E - Manual (Page 178)

English
172
Shooting
When zooming
in or out, the
zoom
movement
stops
momentarily. The optical
zoom has
moved to the
maximum
magnification
position. Not a
malfunction.
Release the
zoom switch,
and press it
again.
60
There is noise
in the captured
image. The ISO sensi-
tivity setting is
too high. Set the ISO
sensitivity to a
lower setting.
83
The \ icon
appears, and
shooting is not
possible. The camera’s
internal
temperature is
high. Discontinue
shooting, and
wait for the
camera to cool
down before
using it again.
—
Monitor
No playback
image
appears. The main
switch is not
set to PLAY. Set the main
switch to PLAY.
43, 48
Viewing
images
The image is
too dark. The flash was
blocked by a
finger or other
object. Hold the
camera
correctly, and
make sure the
flash is not
obstructed.
39
The subject
was too far
away. Capture the
image in the
range of opera-
tion of the flash.
182
The subject
was lit from
behind. Use the forced
flash mode.
61
Use the expo-
sure correction
function.
63
Use the spot
light-measuring
mode.
82
There is not
enough light. Adjust the ISO
sensitivity
setting.
83
Problem Cause Action
Reference
page