Sanyo VPC-HD1E - Manual (Page 53)

47
English
CAPTURING AND PLAYING BACK STILL IMAGES
HINT
What is the camera focusing on?
i A target mark & on the monitor shows the
area the camera is focusing on.
i The camera automatically determines the
correct focus by measuring from 5
different focus points within the shooting
area. If the target mark is at a position
that is different from the point you wish to
focus on, you can refocus, for example,
by changing the shooting angle.
i The large target mark appears when
the camera focuses on a wide area in
the center of the screen.
The shutter speed and aperture are
displayed
i When the camera focuses and the target mark appears, at the same time, the
shutter speed and aperture settings are also displayed. You can use them as a
reference when shooting.
If the camera shake icon > appears...
i During still image shooting, if the shutter speed is slow and the possibility
that the image may be blurred due to camera shake becomes high, the
camera shake icon may appear on the monitor. In this case, use a tripod to
stabilize the camera when shooting, or set the flash operation mode to
automatic (page 61).
i When shooting with the scene select function set to the fireworks +
mode, the camera shake icon always appears, but this is normal.
F3.5
1/40
Shutter speed
Aperture
Target mark