Sanyo VPC-HD1E - Manual (Page 157)

151
English
CONNECTING TO A TV
Playback
i After connecting the digital camera to the television, set the TV input switch
to VIDEO input.
i When an S-AV interface cable is connected, no image appears on the
camera’s monitor.
i The playback method is the same as when viewing images on the
camera’s monitor.
Audio playback: see page 58
i The remote control unit can be used for playback (page 59).
i The same playback procedure as when playing back with the camera is
used to play back audio recordings as well.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
HINT
About the display when the “PAL” TV system is selected (page 133) and
the supplied S-AV interface cable is used to connect the camera to the
TV
During recording:The image appears on the monitor only; it does not appear
on the TV.
During playback: The image appears on the TV only; it does not appear on
the monitor.