Sanyo VPC-HD1E - Manual (Page 126)

English
120
1 Date and time setting
(page 36)
h Set the camera’s internal clock.
2 Operation sounds setting
(page 121)
h Select the operation sounds
that are produced when the
camera’s buttons are pressed,
and adjust the operation sound
volume.
3 Help display setting (page 123)
h Turn the help display on or off.
4 Post-view (page 124)
h Specify how long the captured
image is displayed on the
monitor after the still image
shooting button is pressed.
5 Wind noise reduction setting
(page 125)
h Set the wind noise reduction
function on or off.
6 Noise-reduction (page 126)
h Set the noise-reduction
function on or off.
7 Image quality adjustment
(page 127)
h Adjust the image quality during
shooting.
8 Flicker-reduction (page 128)
h Set the flicker-reduction
function on or off.
9 Digital zoom setting (page 129)
h Enable or disable the digital
zoom.
0 Monitor brightness (page 130)
h Adjust the brightness of the
monitor.
A External microphone (page 131)
h Adjust the input level of a
microphone connected to the
camera.
B Screen language (page 132)
h Select the language in which
the monitor messages are
displayed.
C TV output settings (page 133)
h Select the type of video signal
that is output from the camera’s
USB/AV terminal.
D Power save function (page 137)
E File number reset (page 139)
h Select the file number reset
function.
F Card format (page 142)
h Use the camera to format the
memory card.
G Reset camera settings
(page 144)
h Reset the camera to the
factory-preset settings.
H Remaining battery power
(page 147)
* Icons 7 through G are displayed when you toggle the SET button up or
down to scroll.