Siemens Gigaset C340 - Manual (Page 32)

31
Base station settings
Gigaset C340 / Im-eng / A31008-M1621-R101-1-7619 / settings_bs_hs.fm / 23.11.04
Changing the system PIN
You can change the base's 4-digit default
system PIN ("0000") to a 4-digit PIN known
only to yourself.
§Menu§
¢
Settings
¢
Base
¢
System PIN
~ Enter the current system PIN
and press §OK§ .
~ Enter your new system PIN
and press §OK§ . For security the
PIN is shown as four stars
(****).
~ Now re-enter the new system
PIN and press §OK§ .
a Long press (idle status).
Repeater support
You can use a repeater to boost the range
and reception of your base station. Before
you can use it you must activate the
repeater mode. This will terminate any
calls that are in progress at the time.
Requirement: A repeater must be regis-
tered.
§Menu§
¢
Settings
¢
Base
¢
Additional
Features
¢
Repeater Mode
§OK§ Press the control key to con-
firm.
When repeater mode is active, the menu
option is marked by a ‰.
Restoring the base default
settings
Restoring the base default settings does
not de-register the handsets. The follow-
ing settings are not affected:
u System PIN
u SMS info services
You will find a list of the default settings in
the Appendix, page 37.
Resetting the base with the menu
§Menu§
¢
Settings
¢
Base
¢
Base Reset
~ Enter the system PIN and
press §OK§ .
§OK§ Press the control key to con-
firm.
Caution:
Thoroughly memorise the new system PIN! If
you forget it the phone will require expert
intervention. If this happens, contact the Sie-
mens Hotline (page 35).