Sony PMW-F3K - Manual (Page 116)

Setup Menu List 116
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
SDI/HDMI Out
Display
Setting the
character
information for
digital outputs
On / Off Set whether to add the same menus and status indications as
those on the LCD monitor/viewfinder screen to the output
signals from the SDI OUT and HDMI OUT connectors.
Note
On the thumbnail, EXPAND CLIP and SHOT MARK
screens, the same menus and status indications as those on the
LCD monitor/viewfinder screen are displayed regardless of
the setting of this item.
Video Out
Display
Setting the
character
information for the
composite output
On / Off Set whether to add the same menus and status indications as
those on the LCD monitor/viewfinder screen to the output
signal from the VIDEO OUT connector.
Note
On the thumbnail, EXPAND CLIP and SHOT MARK
screens, the same menus and status indications as those on the
LCD monitor/viewfinder screen are displayed regardless of
the setting of this item.
Down
Converter
Selecting the
operation mode of
the down converter
Squeeze / Letterbox / Edge
Crop Set the output mode (aspect) for SD signals
Squeeze: To horizontally reduce a 16:9 picture to output a 4:3
picture
Letterbox: To mask the upper and lower areas of a 4:3 picture
to display a 16:9 picture in the center of the screen
Edge Crop: To cut the both sides of a 16:9 picture to output a
4:3 picture
23.98P Output
Selecting Output
mode
59.94i (2-3PullDown)/
23.98PsF Select the video output format when the video format is HQ
1920/23.98P or HQ 1440/23.98P (invalid with video formats
other than HQ 1920/23.98P and HQ 1440/23.98P).
Dual-Link &
Gamma Select
Setting the dual-
link output
Off / 1.5G YPbPr422 & Video Set the output from the HD SDI A/B connectors.
Off: No signal output
1.5G YPbPr422 & Video: To output 1.5G Dual-Link HD-SDI
signal using both the A and B connectors.
Note
The following choices become available when the CBK-
RGB01 RGB and S-LOG Output Option is installed.
1.5G RGB444 & Video
1.5G RGB444 & S-Log
3G YPbPr422 & Video
3G RGB444 & Video
3G RGB444 & S-Log
S-LOG LUT
Select
Setting the MLUT
for S-LOG output
Off /
P1: 709 (800%) /
P2: HG8009G40 /
P3: HG8009G33 /
P4: 709 (180%) /
U1: 709 (180%) /
U2: 709 (180%) /
U3: 709 (180%) /
U4: 709 (180%) /
U5: 709 (180%) Select the MLUT (Monitor Look Up Table) to be applied to
the video signals with S-LOG except for the signals of Dual-
Link output (signals recorded on the camcorder, and signals
output from the SDI output, HDMI output, Video output, and
i-LINK output)
Off: MLUT not applied (original S-LOG is output)
709 (800%): Gamma 709 with 800% dynamic range
HG8009G40: Hypergamma with 800% dynamic range
HG8009G33: Hypergamma with 800% dynamic range
709 (180%): Gamma 709 with 800% dynamic range
VIDEO SET
Menu items Setting values Contents