Sharp DV-SR3U - Manual (Page 74)

74
Playing 2 Channel Audio with a
Digital Connection
Enjoying High Quality Sounds
Digital Connection to an MD Recorder or
Other Audio Equipment without a Dolby
Digital Decoder
Audio CD or Video CD
• You can enjoy these discs by playing them back by the
ordinary playback procedure. (The normal audio output
is not played back for discs recorded with DTS.)
DVD Video Disc
• There is no audio signal generated for DVD video discs
recorded with DTS. A processor or amplifier equipped
with a DTS Surround decoder function is required to enjoy
DTS audio.
COMPONENT OUT IN FROM ANTENNA
480i/
480p
OPTICAL COAXIAL
DIGITAL AUDIO OUT VHF/UHF/CATV LINE LINE S-VIDEO VIDEO R-AUDIO-L S-VIDEO VIDEO R-AUDIO-L
PASS THROUGH
OUT 1
OUT 2
IN 1 AUTO REC
IN 2
Audio equipment with an
optical or coaxial digital
input terminal
Optical digital cable
(commercially available)
Coaxial digital cable
(commercially available)
or
To DIGITAL
AUDIO Output
OPTICAL terminal
To optical digital
input terminal To coaxial digital
input jack
To DIGITAL
AUDIO Output
COAXIAL jack
The Recorder
Important!
• When using this connection, set “DIGITAL AUDIO
OUTPUT” to “PCM” (see page 80).
Digital Connection to an MD Recorder to Record a CD
• When you are using a digital connection to record
the contents of a CD to an MD, the track numbers of
the CD may not match the track numbers recorded
to the MD.