Sharp DV-SR3U - Manual (Page 42)

42
9
Press \ / | to select “REC.
MODE”, then press SET/ENTER.
10
Press ' / " to select the
recording mode, then press SET/
ENTER.
• If there is not enough empty space
(time), a message is displayed.
Select the recording mode again.
When “MANUAL SETTING (MN)” is
selected:
• Select the recording mode with
\ \ \ \ \ / | | | | |, then
press SET/ENTER. (The recording mode
can be selected from 32 levels.)
11
Confirm the setting of timer
program, press
\ to select
“COMPLETE”, then press SET/
ENTER.
• “TIMER PROGRAM LIST” screen is
displayed.
• The TIMER indicator on the front of
the Recorder lights up and timer
programming is completed.
12
Confirm the programs on the list
and then press SET/ENTER.
• Program that has just been set is
selected.
• The screen in step 2 is displayed.
• If you want to timer record more
programs, repeat from step 2.
13
Press EXIT to complete timer
setting.
• Timer recording will function even
after you turn the power off.
Timer Recording
NOTE
To Correct Date in Step 3
• Press
\ \ \ \ \ / | | | | | to select the date, then press
' ' ' ' ' / " " " " " to correct.
To Correct Time in Step 4, 5, 6
• Press
\ \ \ \ \ / | | | | | to select hour or minute, then
press ' ' ' ' ' / " " " " " to correct.
To Set Daily and Weekly Timer Program
• Press Blue (A) or Red (B) in step 3. Each
time you press the button, setting changes
as shown below:
• A message will be displayed when two or
more timer programs overlap.
• A message will be displayed if previously
set timer programs total 8. Select “NO” and
press SET/ENTER. Then, cancel unneces-
sary timer programs.
• Timer recording will not start during disc
playback.
• When the power is off while recording timer
is set, front display panel will light up once
timer recording starts. If you want to turn off
the light, set “LCD BACKLIGHT REC.”
(page 82) to “YES”.
You can also turn off the light by pressing
BACK LIGHT on the remote control (under
the cover) for more than 2 seconds.
Convenient Functions When Recording
Exact Recording (page 76)
• If you set EXACT RECORDING to “YES”,
the Recorder will automatically adjust the
recording mode of timer recording so the
recorded programs will fit on one disc.
To check, change or cancel
timer settings
• See page 43.
To stop recording while
timer recording is in
progress
• If you press ■STOP, “TIMER RECORD-
ING IS IN PROGRESS. IF YOU PRESS
THE STOP BUTTON ONCE MORE, TIMER
RECORDING CANCELS AND RECORD-
ING STOPS.” will appear on the screen.
Even that message goes out of the
screen, pressing
■STOP one more time
will stop the recording.
REC. MODE COMPLETE
ENTER SELECT
DAILY WEEKLY ONCE
ENTER RETURN n
REC. MODE COMPLETE
ENTER SELECT
DAILY WEEKLY ONCE
ENTER RETURN n
Blue (A)
(DAILY):
Red (B)
(WEEKLY):
DAILY MO-SAT MO-FRI
MONs FRIs SATs SUNs