Sharp DV-SR3U - Manual (Page 73)

73
Enjoying High Quality Sounds
Playing 2 Channel Audio with an
Analog Connection
NOTE
• When connecting audio equipment using analog
connection, we recommend that you set “DD OUTPUT
LEVEL” to “NO” (see page 81).
If you set to “YES”, audio may sound abnormal during
disc playback.
Playing Dolby Digital
(5.1 Channel) and DTS Audio with
a Digital Connection
• Connecting an amplifier with a Dolby Digital/DTS digital
surround processor or a Dolby Digital/DTS digital
surround amplifier to the Recorder’s coaxial or optical
DIGITAL AUDIO Output jack (terminal) provides richer,
more powerful audio play.
• To enjoy DTS Digital Surround audio, select DTS audio at
the disc menu during DVD playback, or select DTS audio
using the AUDIO button (under the cover) of the remote
control.
■ Connection to a processor or amplifier with an optical
or coaxial digital input jack (terminal)
COMPONENT OUT IN FROM ANTENNA
480i/
480p
OPTICAL COAXIAL
DIGITAL AUDIO OUT VHF/UHF/CATV LINE LINE S-VIDEO VIDEO R-AUDIO-L S-VIDEO VIDEO R-AUDIO-L
PASS THROUGH
OUT 1
OUT 2
IN 1 AUTO REC
IN 2
(White) (Red)
(White) (Red)
Audio cable
(commercially available)
To AUDIO
Output jacks
To amplifier
audio input jacks
Audio equipment, etc.
Jack and Plug Colors
Audio Left: White
Audio Right: Red
The Recorder
COMPONENT OUT IN FROM ANTENNA
480i/
480p
OPTICAL COAXIAL
DIGITAL AUDIO OUT VHF/UHF/CATV LINE LINE S-VIDEO VIDEO R-AUDIO-L S-VIDEO VIDEO R-AUDIO-L
PASS THROUGH
OUT 1
OUT 2
IN 1 AUTO REC
IN 2
Optical digital cable
(commercially available)
Coaxial digital cable
(commercially available)
or
To DIGITAL
AUDIO Output
OPTICAL terminal
To optical digital
input terminal To coaxial digital
input jack
To DIGITAL
AUDIO Output
COAXIAL jack
The Recorder
Dolby Digital (5.1ch)/
DTS processor or amplifier
Important!
• When using this connection, set “DIGITAL AUDIO
OUTPUT” to “Dolby Digital” (see page 80).
NOTE
• To play a disc recorded with DTS, you need to use DTS
processor or amplifier.
• This connection is not possible if the processor or
amplifier to which you want to connect does not have an
optical or coaxial digital input jack (terminal).
• Refer to the operation manual for the processor or
amplifier for information about connecting to it.