3 email notice, 4 event full screen, 5 event duration – Speco Technologies DVR-16TT User Manual
Page 92: 6 per channel config, Email notice, Event full screen, Event duration, Per channel config
User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06
91
5.6.3
Email Notice
The item enables (ON) / disables (OFF) the Email notification of an event.
When an alarm event is triggered and
concerning the alarm event will be sent. The default setting is
NOTE:
In order to send an event notification e-mail successfully,
ensure that the unit connects to the Internet.
5.6.4
Event Full Screen
This function allows the unit to display the alarm channel in full screen size
when an alarm is triggered.
Select
channel on Main Monitor when an alarm is triggered; select
the alarm channel on Call Monitor; and select
channel on both Main Monitor and Call Monitor.
5.6.5
Event Duration
This item determines the duration of the buzzer and Alarm Out relay function
after an alarm is triggered. The available event duration range is from 5
second to 999 seconds. The default setting is 5 seconds.
5.6.6
Per Channel Config
This menu is used to set the Video Loss Detect, Motion Detect and Alarm In /
Out function for each channel. The menu is displayed as below.
Per Channel Config
1. Channel Select
2. Video Loss Detect
3. Motion Detect
4. Detection Config
5. Alarm In
6. Alarm Out
CH1
OFF
OFF
OFF
None