Speco Technologies DVR-16TT - Manual (Page 91)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
90
A sequence can have up to 16 entries. The user can select fewer than 16
entries for a camera sequence and leave the remaining entries blank. The
sequence can include a specific camera or cameras multiple times.
5.6 Event Setup
This menu allows the user to determine DVR-4TN/8TN/16TN/16TS/16TT
series behavior in response to an alarm event. In the Main menu, move the
cursor to and press ENTER. The following menu is displayed.
Event Setup
1. Internal Buzzer
2. Event Icon
3. Email Notice
4. Event Full Screen
5. Event Duration
6. Per Channel Config ON
ON
OFF
Items in the Event Setup menu are described in the following subsections.
5.6.1 Internal Buzzer
This item allows user to enable / disable the DVR-4TN/ DVR-8TN/ DVR-16TN
series internal buzzer. If set to , the buzzer is activated in response to
an alarm. If set to , the buzzer is not activated. The default setting is
.
5.6.2 Event Icon
This item enables (ON) / disables (OFF) the display of an Event Icon on the
main monitor when an alarm event occurs. The default setting is
(enable).
The event types are represented by a character respectively; the descriptions
are listed in the table below.
Event type Description
A
Alarm in event
M
Motion detection event
L Video loss event