Speco Technologies DVR-16TT - Manual (Page 67)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
66
In the Network Setup menu, select and press ENTER to
enter the Dial-out menu. The menu displays as follows.
Dial-out Setup
1. Dial-out DHCP
2. Dial-out IP
3. Dial-out Netmask
4. Dial-out Gateway
5. Dial-out DNS
6. Phone Number
7. Dial-out Account
8. Dial-out Password
9. Dial-out Idle Time
10. Dial-out Max Time
11. Connect
OFF
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0 Min
0 Min
No
- Dial-out DHCP
This item allows the user to obtain a dynamic IP address from a DHCP
(Dynamic Host Configuration Protocol) server over a modem connection. If
the item is enabled (ON), a dynamic IP will be assigned to the
DVR-4TN/8TN/16TN/16TS/16TT
series unit. In this case, the user does not
need to configure a static IP and the following settings will be “read only.”
Select to enable the DHCP function, or to set the dial-out IP
address, Netmask, Gateway and DNS manually. The default setting is .
- Dial-out IP
This item is for setting a static IP address that identifies the DVR-4TN/
DVR-8TN/ DVR-16TN
series unit over a modem connection. Set the
DHCP> to for accessing this item.
Move the cursor over and press ENTER, then press UP /
DOWN keys to change the values in the selected field.