Speco Technologies DVR-16TT - Manual (Page 87)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
86
Follow these steps for ezRecord Setup:
• Select and press ENTER, then press
UP/DOWN to choose the option you want. The maximum days allowed
depends on the size of your HDD, in the other words, the larger the HDD
installed, the more days the unit can record.
• Move to and press ENTER. This item is for you to
select whether you want the DVR to record during daytime. If yes, using
UP/DOWN to select as option; or, select for not recording
during daytime.
• Repeat the same procedures through the 3rd and 4th items, respectively.
Note that will be not accessible if you select for
the item in .
• The Quality will be automatically accounted for, according to upper items
you have set, and shown on the screen. This item is for “read-only.” Five
options, including , , , and , can be
viewed in this item. We strongly recommend to keep the quality higher
than “Middle”.
NOTE:
The current number of connected cameras will affect the
recording quality which wil be automatically calculated through the
. Therefore, once you disconnect cameras or
connect more cameras to the unit, you should reset the Setup>.
5.4.6 Data Lifetime
Data Lifetime indicates the time that a recording is saved and remains in the
HDD, between the creation and deletion of a record. Only those video files
recorded during Data Lifetime will be displayed on the screen and can be
played back; those video files recorded outside the duration time will be
hidden.
Press ENTER to select this item in Record Setup menu, and then use UP /
DOWN keys to set the data lifetime. The value ranges from <1> to <365>
days, or select <0> to disable the function.
NOTE: If you want to play back the video, which is outside the data
duration of lifetime, please extend the duration till the recording
data/time of the video is included.