Speco Technologies DVR-16TT - Manual (Page 31)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
30
3.6.5 To Record Event Video Only
If you want your DVR unit to start recording only under the alarm is triggered,
follow the steps:
• Enter the OSD setup menu with correct password.
• In the OSD setup menu, select menu. Move the cursor to
the item , and select .
Refer to Section 5.4.3 Preset Record Configuration for more detailed
information.
4. Basic Operation
The DVR-4TN/8TN/16TN/16TS/16TT series allows the user to easily access
some general operations through the front panel. The following sections
introduce the general operation of the unit.
4.1 Viewing Live / Playback Video
The general functions in live and playback mode are described in the sections
that follow.
4.1.1 Viewing Modes
The DVR-4TN/8TN/16TN/16TS/16TT series supplies the user several ways of
viewing both live and recorded video. The following descriptions describe the
view formats that are available.
Viewing in Full Screen
Press any CHANNEL key directly to view the corresponding camera image in
full view format.
Viewing in Multi-window
Various multi-window view formats are available for selection. To switch
between these viewing formats, press MODE repeatedly.