Speco Technologies DVR-16TT - Manual (Page 56)

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 55
5.1.3.3 Date Display Mode
This function allows the user to set the OSD display type for the date / time.
There are three options to select from: , or . “Y”
represents “Year”, “M” represents “Month” and “D” represents “Day”.
Use UP / DOWN keys to change the setting. The default setting is in
both NTSC / PAL formats.
5.1.3.4 Time Display Mode
The user can choose to set the time format to <12 hour> or <24 hour>. Use
the UP / DOWN keys to change the format. The default setting is <24 hour>.
5.1.3.5 Date/Time Order
This item is used to set the order of Date/Time display to or
. Select this item and press ENTER, then use UP / DOWN keys
to change the setting.
5.1.3.6 Daylight Saving Time
This item is for people who live in certain regions to observe Daylight Saving
Time. Select to enable, or to disable the function.
If the function is disabled, the DST Start / End time and DST Bias will be
grayed out and cannot be accessed. If this function is enabled, the date/time
information will be shown on the screen with a DST icon when playing back
recorded video or searching video in the event list. “S” indicates summer time
and “W” indicates wintertime.
5.1.3.7 DST Start / End
These items are used to set the daylight saving duration. Use LEFT / RIGHT
to move the cursor to the next or previous field, UP / DOWN to change the
settings.