beautypg.com

5 trigger port, 6 email address, Dial-out idle time – Speco Technologies DVR-16TT User Manual

Page 70: Dial-out max time, Connect, Trigger port, Email address

background image

User’s Manual

DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06

69

-

Dial-out Idle Time

This item indicates the longest amount of time that the modem connection
remains active if there is no acknowledgement from the remote pc. The value
can be set from 1 min to 600 min. If selecting <0>, the modem connection
keeps active continuously.

-

Dial-out Max Time

This item indicates the longest amount of time that the connection via modem
remains active. The value can be set from 1 min to 600 min, or <0> to keep
the connection indefinitely.

-

Connect

When the Dial-out related settings are configured, set this item to to
starting dial-out or select to disconnect.

5.1.6.5 Trigger Port

To avoid the possibility of the default service port (port 100)being blocked, this
item enables the user to change port 100 into another port.

To change the trigger port, move the cursor over and press
ENTER, then adjust the setting by UP / DOWN keys.

5.1.6.6 Email Address

This item is used to edit the e-mail address where alarm event information will
be sent. Follow these steps to setup the e-mail address.
• Select from Network Setup menu and press ENTER. A

virtual keyboard displays.

• Use Direction keys to move the cursor for selecting character.
• Press ENTER to add the selected character to the password entry field.
• When done, move the cursor to and press ENTER to save the

settings and exit.

This manual is related to the following products: