Speco Technologies DVR-16TT - Manual (Page 65)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
64
• Use Direction keys to move the cursor to the desired character.
• Press ENTER to add the selected character to the username entry field.
• When done, move the cursor to and press ENTER to save the
settings and exit.
NOTE:
The Server IP and the Client IP must not be identified as the
same IP address; but they have to be set in the same domain.
For example: Server IP: 192.168.0.1
Client IP: 192.168.0.2
- Dial-in Password
This item allows the user to setup the Dial-in password. Follow these steps to
setup the login password.
• Select from Dial-in Setup menu and press ENTER. A
virtual keyboard displays.
• Use Direction keys to select character.
• Press ENTER to add the selected character to the password entry field.
• When done, move the cursor to and press ENTER to save the
settings and exit.
- Server IP
This item is for setting the IP address that identifies the
DVR-4TN/8TN/16TN/16TS/16TT series unit over a modem connection. To set
the server IP, follow these steps:
• Select .
• Using LEFT/ RIGHT to move the cursor over the IP, and stop where you
want to make the change.
• Press ENTER, and then use UP/ DOWN to change the value.
• When done, press ENTER again to exit.
• Repeat the procedure until the IP is completely set.