Speco Technologies DVR-16TT - Manual (Page 55)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
54
5.1.3 Date / Time
The user can set the current date, time and other OSD parameters in this
menu. The Administrator’s privileges are required for entering the submenu.
In the System Setup menu, select and press ENTER; the
Date/Time menu displays as follows.
Date/Time
1. Date
2. Time
3. Date/Time Display
4. Date Display Mode
5. Time Display Mode
6. Date/Time Order
7. Daylight Saving Time
8. DST Start
9. DST End
10. DST Bias
2005/02/21
10:39:26
1 Row
Y/M/D
24 HR
Date First
ON
Apr, 1 st Sun, 02:00
Apr, Last Sun, 02:00
60 Min
NOTE:
The reset date / time setting applies only to future recorded
video, the date and time of previously recorded video will not be
changed.
NOTE: After the Date/Time setting is changed, clearing the database is
recommended for avoiding record database corruption.
5.1.3.1 Date / Time Setting
Select or and press ENTER to adjust the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
for selecting, and UP / DOWN are used to change the value in the selected
field.
5.1.3.2 Date / Time Display
Users are allowed to choose to set the Date / Time OSD displays in 1 or 2
rows. Use the UP / DOWN keys to change the setting. The default is to
display the date / time OSD in one row.