Speco Technologies DVR-16TT - Manual (Page 76)

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 75
5.1.7.3 Bits
The user can specify the bits in a word that are associated with this protocol.
The available options are <6>, <7> and <8> bits. The default is <8> bits.
5.1.7.4 Stop
The user can specify the stop bit associated with this protocol. Options are
<1> and <2> stop bits. The default is <1> stop bit.
5.1.7.5 Parity
This item is used to specify the parity associated with this protocol. Options
are , , and . The default is .
5.1.8 Audio Output
The item is used to set the audio output mode. The available options are as
listed as follows.
Select this item to play the recording sounds of live image in live mode, and
sounds of recorded video in playback mode respectively.
Select this item to play live sounds in both live mode and playback mode.
Select this item to disable the audio output function.
5.1.9 Key Beep
This item is used to enable or disable the key tone. Select to enable
the key tone, or to disable.