Speco Technologies DVR-PC8 Series - Manual (Page 63)

63
Motion Detection(M):
Records only when there is movement. Refer to setting value to see motion
sensitivity when there is detection of movement. The sensor is not activated.
Continuous(C):
Ignores images captured by the selected camera and records all the images.
The sensor is not activated.
M, S:
Similar to Motion Detection and the sensor is activated.
C, S:
Similar to Continuous Mode and the sensor is activated.
Sensor-Activated (S):
It records when all sensor is activated.
User should select this mode to use with the [PreAlarm] function from the
“Configuration”→“Sensor” tab.
OFF(F):
The camera does not perform recording and surveillance functions.
6.8.2. Frame
Recording frame cannot be set differently according to day and time. When
recording frame schedule is not registered, the frame rate set before the
recording start will be applied.
Add
Recording frame can be set differently according to the time.
Click [Add] button and the “FPS Schedule Add” window will appear.
Record Day
Select “ALL”,”Workdays”,”Saturday”, “Sunday”, “Holiday” .
Time
Select each day and choose the time differently, accordingly. The time unit is
in hours.
FPS
To record different frame rate, click [Yes] in individual frame adjustment.
Select [No] and use the slide bar to set the frame rate to record all of them
with fixed time rate.
Press [Edit] button and a similar screen, which appears when [Add] button is
pressed will appear.
The setting method is same as what is done for the [Add] category.