Speco Technologies DVR-PC8 Series - Manual (Page 48)

48
6.3.7. Recording Mode
When you want to record only the images on sensor-detected camera in full
frame speed instead of the current recording images at the standard frame
rate while the sensor is activated, choose “Optimize Frames Per Second”.
When you want to record both current images and all images on
sensor-detected camera, choose “Normal”.
Note Optimize Frames Per Second:
Records with the maximum speed of product system, without
regard to the present record setting
6.3.8. Sensor Etc
Display mode freezes after sensor
When a sensor corresponding to a selected camera detects any motion, the
system automatically display the images from the camera for the duration of
the preset “Display Mode Freeze after sensor,” regardless of the display mode
selected. When the recording time is up, users can manually select either to
keep sensor display mode or return to the original display mode. Click on the
current recording screen when you want to return to original display mode.
Sound Use
Users can manually select this function to use sound when Check sensor
activates.
Motion Sensor
When the motion sensor is selected, alarm will trigger when the motion is
detected.
Select the sensor and the camera of the image desire to detect when using
the “Motion Sensor”.
Users can manually select the use of relay function.
Note “Motion Sensor” may not be supported depending on the
product.
To Continuous Recording
When continuous recording is selected, it will continuously record while
motion sensor is activating.
After motion sensor stops, recording mode will be changed to previous menu.