Speco Technologies DVR-PC8 Series - Manual (Page 51)

51
6.4.5. Add PTZ Protocol
To install new camera protocol, select “Add PTZ Protocol”
Port
Select the port to install PTZ protocol. Selectable port appears when arrow
button is pressed.
6.4.6. Current View
Show the current viewing screen of the chosen camera. See this screen to
control the location of selected camera.
6.4.7. Camera Address
Click on the keyboard to input the suitable controller number according to the
controller type. Maximum of 255 numbers can be set for controller number.
The controller number in the actual controller should correspond with the
selected camera number.
To operate camera control functions,
1. Set the type of camera protocol.
2. Select the desired camera to control.
3. Select Enable PTZ.
4. Input the Camera Address using the keyboard icon.
5. Control the camera location by using Pan/Tilt buttons.