Speco Technologies DVR-PC8 Series - Manual (Page 50)

50
6.4 PTZ
This setting tap is for camera control.
Note The manual may differ because the control functions vary between the manufacturers or by the products used.
The manual provides the standard model.
6.4.1. Use PTZ
Select this category to use the camera controller for Pan (left right) / Tilt (up
down). To activate the installed PTZ, select this category and the camera
controller will be prepared automatically. This category is not selected in
default.
6.4.2. Select Camera
Select the desired camera to control. Several cameras can be selected for a
controller. Selected camera will change to blue. Click once more and the
selection will be disabling
6.4.3. Enable PTZ
Click on this check box to enable PTZ functions.
6.4.4. PTZ Protocol
Click the down arrow button and PTZ protocol list will appear