Sony PEG-T665C - Manual (Page 160)

160
Preparing the CLIÉ Remote Commander
for your use
Assigning devices to the CLIÉ Remote Commander
Note
To check whether the manufacturer of your remote-controlled device is
supported by the CLIÉ Remote Commander application, refer to the “Appendix”
on page 204.
1
On the Application Launcher screen, rotate the
Jog Dial
™ navigator to select CLIÉ RMC and press the
Jog Dial navigator.
Or, tap the CLIÉ RMC icon on the Application Launcher screen.
The CLIÉ Remote Commander application starts and a list of the
pre-assigned device is displayed.
2
Tap New.
The New Entry screen is displayed.