Get log, Load firmware, Get log 25 – Sun Microsystems StorageTek HP LTO4 User Manual

Page 33: Load firmware 25

316196601 • Revision: A

Chapter 3 Virtual Operator Panel 25

Diagnose Drive Tab

Get Log

If a Dione card or connection is consistently having problems, engineering may
request you retrieve a log of events from the Dione card.

1. Click Get Log.

2. Create and select a location for the file.

Once the file has transferred, the operation is complete.

Load Firmware

To load new Dione card firmware:

Obtain the firmware and place it in a directory file easy to locate.

Click on Load Firmware.

A dialog box opens requesting the location of the firmware.

Navigate to that location and load the files.

Note there are two files to download: *.bin and *.hdr.

FIGURE 3-9

Run LED Diag