Sun Microsystems StorageTek HP LTO4 - Manual (Page 22)

Removal and Replacement
14 KMS: LTO4 Technical Brief • June 2008 Revision: A • 316196601
Removal and Replacement
Encryption-capable HP LTO 4 tape drives contain an Ethernet card, which is a field
replaceable unit (FRU). Depending on the library, each drive tray contains the card in a
different location; however, the removal and replacement procedures are similar.
For specific information about the drive trays, refer to:
If the manuals are not on hand, go to the Sun Documentation Web site at:
http://docs.sfbay.sun.com/app/docs/prod/tape.storage#hic
Removal
The following procedure basically describes how to remove and replace a Dione card:
1. Follow the procedures for taking the drive offline.
2. Follow the procedures for removing the drive from the library.
SL8500 Modular Library System Installation Manual StorageTek: 96138
SL3000 Modular Library System Installation Manual StorageTek: 316194201
SL500 Modular Library System Installation Manual StorageTek: 96114
L700/1400 Library Installation Manual StorageTek: 95843
L180 Library Installation Manual StorageTek: 95896
FIGURE 2-5 Dione Card and Connectors
1. Dione card
2. Ethernet connector
3. P5
4. Signal connector 5. Drive power jumper
6. Power connector to drive
7. P6