Sun Microsystems StorageTek HP LTO4 - Manual (Page 15)

316196601 • Revision: A 7
C H A P T E R
2
Dione Card
The Dione card—pronounced (D - O - nee)—is a custom design that provides an
Ethernet interface for the HP LTO4 tape drive. With this interface, the HP LTO4
tape drive can:
■ Encrypt and decrypt data using the Sun StorageTek Crypto Key Management
System (KMS), Version 2.0 and above
■ Configure and enroll the tape drive using the Virtual Operator Panel (VOP),
Version 1.0.12 or higher
Basically, the Dione card is a translation device between the serial interface on the
tape drive and the secure Ethernet port for use with the KMS.
The Dione card includes:
■ Telnet server for configuration and management
■ FTP server for installing new firmware and retrieving firmware trace logs
■ SOAP client (with TLS 1.0 support) for communication with the KMS
Firmware Requirements
The minimum firmware requirements include:
TABLE 2-1 Firmware Requirements
Component Version (or above)
Dione card 1.178
HP LTO4 tape drive H45S Fibre Channel
B44S SCSI
KMS Version 2.0 2.02
ACSLS 7.1 and 7.1.1 with PUT0701, or 7.2, and 7.3
SL8500 library 3.98B
SL3000 library 2.01 (SPS)—Requires approval
SL500 library i15 — 1300 (SPS)—Requires approval
L-Series 3.18.xx
Virtual Operator Panel 1.0.12