Sundance Spas 680 - Manual (Page 52)

Page 46
680 SERIES
21.0 Optional SunSound TM Stereo Receiver Functions
(Burlington, Hartford and Hawthorne Models Only)
1
8 9 10 11 12 13 14 15 16 17
2 3 4 5 6 7
To start enjoying your new Sundance SunSound Stereo Receiver, please
read the following operation instructions in their entirety.
1. Power Button: Press PWR (Power) to turn deck on or off.
2. Equalization Button: Repeatedly press EQ/LD to choose from DSP
Off, Jazz, Pop, Classic, Rock or Vocal equalization options. Press
and hold EQ/LD for 2 seconds to enable or disable the “LOUD”
function.
3. Mute Button: Press Mute to mute audio output. Press again to
return to previous volume level.
4. Open Button: Press Open to flip down the front access panel for CD
access. Gently insert CD into slot, DO NOT FORCE! Make sure to
close the front panel to prevent damage to the unit.
Note: Never insert a wet or moist CD since it may damage the
mechanism and void the manufacturer warranty.
5. A/PS Button: Press A/PS to scan station presets. The tuner will scan
up, wait for a few seconds, then continue. Once a desired station is
found, press A/PS a second time to cancel scan. To automatically
scan and store station presets, simply press and hold A/PS for
several seconds, then release.
6. DISP Button: Press DISP to switch between clock and station
frequency. When selected, the clock will display for 5 seconds then
automatically revert back to station frequency.