Sundance Spas 680 - Manual (Page 26)

Page 20
680 SERIES
CAUTION: Never leave your spa unattended for any reason
while the cover is open and accessible to small children and
animals.
CAUTION: To prevent the unlikely possibility of contracting
a waterborne illness, maintain water chemistry within step
6 parameters. If you or other bathers experience such a
condition, discontinue use and seek medical attention.
!
!
15. Establish a sanitizer reading between 3.0-4.0 ppm chlorine or
2.0- 4.0 ppm bromine, then allow the spa to set undisturbed for 8
hours. Retest water after 8 hours to determine if sanitizer levels
are stable. If sanitizer levels are stable, your spa is ready for use.
To ensure healthy water conditions, always maintain a constant
sanitizer reading within the levels recommended by the Association
of Pool And Spa Professionals/USA printed on the inside cover of
this manual. If sanitizer levels are not stable at this time, it will be
necessary to repeat this procedure in its entirety (steps 1-15) until
stable sanitizer readings are achieved.
16. After adequate sanitizer levels are achieved, close all spa air controls
by rotating them clockwise to maximize heat retention when spa is
not in use.