0 spa maintenance, 1 cleaning the filter, Spa maintenance – Sundance Spas 680 User Manual
Page 36: Cleaning the filter

Page 30
680 SERIES
11.0 Spa Maintenance
Proper and regular maintenance of your spa will help it retain its beauty
and performance. Your authorized Sundance dealer can supply you with
all the information, supplies, and accessory products you will need to
accomplish this.
DANgER: Risk of Severe Injury or Drowning!
The suction fittings in this spa are sized to match the specific
water flow created by the pump. If it is necessary to replace
the suction fittings or the pump, be sure that the flow rates
are compatible.
Never operate or use the spa if the filter, filter lid, or
•
skimmer assembly are broken or any part of the skimmer
assembly is missing. Please contact your dealer or nearest
service center for service.
Never replace a suction fitting with one rated less than
•
the flow rate marked on the original suction fitting. Using
improper suction fittings can create a body or hair suction
entrapment hazard that may lead to drowning or near
drowning.
Never use the spa unless all suction guards, filter, filter lid,
•
or skimmer assembly are installed to prevent body and/or
hair entrapment.
Keep hair, loose articles of clothing or hanging jewelry
•
away from suction fittings, rotating jets or other moving
components to avoid entrapment that could lead to
drowning or near drowning.
!
11.1 Cleaning The Filter
A. Burlington, Hartford and Hawthorne
Models:
Your spa is equipped with two filter cartridges
which are utilized as follows:
•
Models equipped with the optional 24
hour circulation pump use cartridge 1
for the circulation pump and cartridge
2 for jets pump 1.
•
Spas not equipped with the optional
24 hour circulation pump use both
filter cartridges for jets pump 1.
During spa use or an automatic filter cycle, water flows through the
spa skimmer and into both polyester mesh filter cartridges to trap
suspended particles and oils on their surface pleats. To ensure optimum
performance, it is necessary to remove and clean both filter cartridges
once a month or sooner depending on spa use and water quality.
To Install: Turn
Clockwise
To Remove: Turn
Counterclockwise
Cartridge 2 Cartridge 1
Spa Filter Bay