Siemens C450 IP - Manual (Page 24)

23
Setting handset/base station
Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / settings_bs_hs_pabx.fm / 01.03.2007
Ve
rs
ion 4,
16
.09.
2005
Setting handset/base
station
The handset and base station are preset,
but you can change these settings to suit
your individual requirements. You will find
the relevant functions in the submenus
§Menu§
¢
Settings and §Menu§
¢
Audio Set-
tings (page 13).
The base station settings are carried out
using a registered Gigaset C45 handset.
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels. You can only adjust the loud-
speaker volume during a call.
You are conducting an external call.
t
Press the control key.
q Adjust the volume and press
§OK§ .
If t is assigned a different function, e.g.
toggling:
§Menu§ Open menu.
Volume Select and press §OK§ .
Make settings (see above).
Setting the ringer volume
The ringer volume is the same for all types
of ring.
§Menu§
¢
Audio Settings
¢
Ringer Volume
Or in idle status:
t Press
briefly.
Then:
q
Adjust the volume and press
§OK§ .
a Press and hold (idle status).
Activating/deactivating the ringer tone
You can turn off the ringer tone on your
handset before you take a call or while the
phone is in idle status. You can take a call
so long as it is displayed on the screen.
Deactivating the ringer tone
P Press the star key and hold
until the Ú icon appears in the
display.
Re-activating the ringer tone
P Press and hold the star key in
idle status.
Activating/deactivating advisory
tones
§Menu§
¢
Audio Settings
¢
Advisory Tones
Select and press §OK§ ( ‰ = on).
All advisory tones are activated or deacti-
vated.
Please note:
The handsfree volume can only be adjusted
when this function is set.