Entering voip user data, Completing the voip settings – Siemens C450 IP User Manual
Page 12
11
First Steps
Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / starting.fm / 01.03.2007
Ve
rs
ion 4,
16
.09.
2005
Entering VoIP user data
Depending on the VoIP provider, the fol-
lowing information will be requested in
sequence:
Username:
If this is required by your pro-
vider, enter name and press
§OK§
.
Authentication Name:
Enter name and press
§OK§
.
Authentication Password:
Enter password and press
§OK§
.
If you have made all the necessary entries,
the Gigaset.net wizard is started. You have
the option of entering yourself in the
Gigaset.net online directory with a name.
For more information on this, please see
the full user guide on the Internet at:
Completing the VoIP settings
Once all the necessary entries have been
made, the handset reverts to idle status.
If all the settings are correct and if the
phone can make a connection to the VoIP
server, then the internal name of the
handset will be displayed:
You can now use your phone to make calls
via the fixed network and the Internet!
Callers can reach you on your fixed
network number and your VoIP number!
No connection to the Internet/VoIP server
If one of the following messages is dis-
played instead of the internal name after
the connection wizard is closed, then
either a fault has occurred or your infor-
mation was incomplete:
Server not accessible!
The phone has no connection to the Inter-
net.
¤
Check the cable connection between
the base station and the router (the
LED on the base station must light up)
and the connection between the router
and the modem/Internet connection.
¤
Check whether the phone is connected
to the LAN.
– It may not have been possible to
dynamically assign an IP address to
the phone
Please note:
Please note when making these entries that
the VoIP user data is case sensitive. Press and
hold the
#
key if necessary to switch
between upper/lower case text and numerical
entry.
This step is only carried out when you are
getting started (when the connection assistant
is started up for the first time). You can also
create the entry via the Gigaset.net directory
Please note:
To ensure that you can always be reached via
the Internet, the router should be permanently
connected to the Internet.
¨
V
INT 1
11.07.06
11:56
§§§§§§INT§§§§§
§§§§Menu§