Opening lists with the message key, Opening list, Dialling with directory/list – Siemens C450 IP User Manual

Page 22

Using the directory and lists

Gigaset C450 IP / IM-Nord EN / A31008-M1713-R201-3-7643 / directories_charges.fm / 01.03.2007

ion 4,

.09.

2005

Opening lists with the
message key

You can use the message key

f to open

the following lists:

SMS list

Network mailbox
If your network provider supports this

function and the network mailbox is

configured for fast access via key 1

Calls list (precondition: Calling Line

Identification enabled)
The numbers of the last 30 outgoing

calls are saved. Multiple calls from the

same number are only saved once (the

last call).

An advisory tone sounds as soon as a new

message arrives in a list. The message key

f flashes. A message appears in the dis-

play.
If you press the flashing

f key, you will

see all the lists that contain new mes-

sages. If only one list contains new mes-

sages, this will be opened automatically.

Opening list

If necessary, select list

Select entry.

For additional information on the lists,

please see the full user guide for your

Gigaset C450 IP (page 5).

Dialling with directory/list

Open directory/list.

Select entry with

Briefly press/press and hold the talk

key

Please note:

If calls are saved in the network answering

machine you will receive a message if the

appropriate settings have been made (see the

network mailbox instructions of your network

provider).

Please note:

You can only dial IP addresses via VoIP.