SIGMA DP1 - Manual (Page 64)

63
COLOR SETTINGS
In addition to standard color settings of the DP1, it is also possible to select
Sepia and Monochrome (B&W) photography modes.
1
Press the button to open [ Shooting Menu].
2
Use the buttons to select [Color Settings] and press the button.
3
Select the desire mode by using the buttons.
4
Press the button or the button to apply the setting or the button
to close the sub-menu without making any changes.
x The selected color setting icon is displayed on the color
LCD monitor. The icon of Normal mode is not displayed.
MODE ICON
Normal
Sepia
SEPIA
B&W
B / W
WARNING !!
x
Once the Color Settings are set, the camera will continuosly hold these
settings until the Color Settings is reset to [ Normal ].
x
Color settings cannot be selected when Image quality is in RAW mode.
x
When RAW mode is selected, it is only posible to use the “Normal” Color
setting. If other image quality modes are selected, all Color Settongs are
available.