SIGMA DP1 - Manual (Page 101)

100
7
C. The Printing Setting screen will be displayed. Each option can be
selected by pressing the
button. Pressing the button will open
further printing details.
C. Printing Setting screen
Start Printing
If button is pressed, it will start printing with the
current printer settings.
Print Size
[Apply Printer Settings] or Card / L / 2L / Postcard / A4
can be selected.
Layout
[Apply Printer Settings] or Without Margin / With Margin
/ 2 up / 4 up / Index Print can be selected.
Date Print
[Apply Printer Settings] or Without Date / With Date can
be selected.
8
After setting each option, select žStart printingſand press the button to
begin printing.
z It will return to the initial PictBridge screen when the printing ends.
WARNING !!
x
Printing cannot proceed correctly if the printer doesn't correspond to the
above-mentioned printing settings, and the specified size format is not set.
x
Please do not remove the USB cable until printing is complete.
x
If you wish to cancel printing please do so from the printer.