SIGMA DP1 - Manual (Page 61)

60
EXPOSURE COMPENSATION
If you want to intentionally overexpose or underexpose the picture, use this
function.
1
Press the button. (The exposure
compensation value is displayed in green
in the lower right of the color LCD monitor.
2
Select the desired compensation value by
using the
buttons.
x Exposure compensation can be set in 1/3
stop increments from +3.0 to -3.0 stops.
3
Press the button again or press the
shutter button “half-way” to apply the
settings.
(The color of compensation value will turn
from green to white)
CAUTION !!
x
The exposure compensation will not disable automatically. After taking the
picture, press the
button and set the compensation value to ±0.0.
x
Exposure compensation function cannot be used with Manual Operation
mode.