SIGMA DP1 User Manual

Page 100

WARNING !!

If no card is inserted into the camera, [No Memory Card] message will be
displayed.

If the card contains still images which cannot be printed, [No images on
Memory card] will be displayed.

If [Printer error! Please check the printer.] message is displayed, please
check your printer and ensure that it is correctly setup and connected.

It is not possible to print RAW images (files with the X3F extension).

Some printers do not include a DPOF setting, therefore it is not possible to
select [Apply DPOF Settings] with such printers.

B. Select Images & Quantity will be displayed. Specify your selection or
select “Select All Images” by pressing the

button and press the

button.

B. Select Images & Quantity Display

ᴾ

Select Images & Quantity

This option allows you to select individual images
and the number of copies for printing. Select the
image that you wish to print by pressing the
button. Then select the quantity of prints by
pressing the

button.

Select All Images

This will print all printable still images recorded on
the card. Press the

button to select the

number of copies.

Cancel All Selections

This will reset the number of copies that has been
previously selected. Press the

button, and

select

žOKſthen press the

or button to

reset the number of copies and return to the initial
PictBridge’s screen.

Press the

button after specifying the desired number of copies.